Skip to main content

Soccer Field

Pole Mount - Sideline Coverage

The loudspeakers are pole mounted 50 feet above the ground on light poles about 180 feet apart.  
Each loudspeaker aims down sharply to focus on an individual zone, minimizing coverage overlap.  
Seating may be on the ground or small bleachers.  
Alternative Coverage (two to three (2-3) loudspeakers - not shown): If mounting heights must be low and not aimed as sharply down, use only one (1) signal-delayed loudspeaker on "Pole B" aimed away from "Pole A". Or, use a larger model on "Pole A" to address the full "Pole B" zone (no loudspeakers on "Pole B").
Four (4) R.25-94Z
Good voice articulation and good musicality.
Four (4) R.35-3896
Great musicality and excellent voice articulation.
Four (4) R.5-66Z
Very good musicality, enhanced low frequency extension and excellent voice articulation.



For maximum system performance and longevity, the loudspeakers must be properly powered to achieve the needed sound pressure level (SPL) in the listening area.


R.25-94Z: 400W to 600W @ 8 ohms per loudspeaker
R.35COAX: 400W to 600W @ 8 ohms per loudspeaker
R.35-3896: 800W to 1200W at 8 ohms per loudspeaker
R.5-66Z: 400W to 600W @ 8 ohms per loudspeaker
R.5-94Z: 400W to 600W @ 8 ohms per loudspeaker
R.5-99Z: 400W to 600W @ 8 ohms per loudspeaker
R.5-96MAX: 1200W to 1800W at 8 ohms per loudspeaker
R2-94Z: 800W to 1200W at 4 ohms per loudspeaker
R2-52Z: 800W to 1200W at 4 ohms per loudspeaker
R2-52MAX: 1200W to 2400W at 8 ohms per loudspeaker




To properly process, equalize and protect the loudspeaker systems, it is recommended to use the Community dSPEC226 digital signal processor.


Some amplifiers have built-in processing which may be adequate when properly programmed. Community's suggested DSP settings for R SERIES loudspeakers can be found HERE.


All of the loudspeakers referenced in this guide require a 24 dB per Octave electronic high pass filter for protection against over-excursion from bass-heavy program material.




When considering the distance between the amplifier and the loudspeaker(s), the following minimum cable gauges are suggested.


Less than 50 feet: 14 AWG
50 to 100 feet: 12 AWG
100 to 250 feet: 10 AWG
Beyond 250 feet: Please contact the Community TAG Team

It is strongly recommended that all loudspeaker level wire be stranded, twisted and never shielded.  Loudspeaker wires should not be connected to earth ground or supporting structures.




For technical and applications assistance, please contact the Community TAG Team (Technical Applications Group) at (610) 876-3400 or




To view the entire Sports Sound Loudspeaker System Design Reference Guide, CLICK HERE.